Polyethylene pipes

The National Standards of Ukraine В.2.7-151:2008

Polyethylene pipes designed for cold water supply (including utility and drinking water) in the temperature range from 0ºC to 40ºC with a maximum working pressure depends on the pipe size, but not more than 25 bar, and other liquid mixtures supply to which polyethylene is chemically resistant. Pipes for utility and drinking water supply made of polyethylene compositions that have been approved by the Ministry of Health Care of Ukraine. Designed for utility and drinking water supply, pipes manufactured under requirements of the National Standards of Ukraine В.2.7-151:2008.

The size and the maximum working pressure for polyethylene pipes of such types as ПЕ63, ПЕ80, ПЕ100

Polyethylene type SDR6 S 2.5 SDR7.4 S3.2 SDR9 S4 SDR11 S5 SDR13.6 S6.3 SDR17 S8 SDR17.6 S8.3 SDR21 S10 SDR26 S12.5 SDR33 S16 SDR41 S20
Maximum operating pressure at 20 ° C MOP (PN), Bar
PЕ63 10 8 6 5 4 3,2 2,5
PE80 25 20 16 12,5 10 8 6 5 4 3,2
PE100 25 20 16 12,5 10 8 6 5 4
dem Wall thickness
dn Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
20 +0,3 3,4 +0,5 3,0 +0,4 2,0 +0,3
25 +0,3 4,2 +0,6 3,5 +0,5 3,0 +0,4 2,3 +0,4 2,0
32 +0,3 5,4 +0,7 4,4 +0,6 3,6 +0,5 3,0 +0,4 2,4 +0,3 2,0 +0,3 2,0 +0,3
40 +0,4 6,7 +0,8 5,5 +0,7 4,5 +0,6 3,7 +0,5 3,0 +0,4 2,4 +0,4 2,3 +0,4 2,0 +0,3
50 +0,4 8,3 +1,0 6,9 +0,8 5,6 +0,7 4,6 +0,6 3,7 +0,5 3,0 +0,4 2,9 +0,4 2,4 +0,4 2,0 +0,3
63 +0,4 10,5 +1,2 8,6 +0,9 7,1 +0,9 5,8 +0,7 4,7 +0,6 3,8 +0,5 3,6 +0,5 3,0 +0,4 2,5 +0,4
75 +0,5 12,5 +1,4 10,3 +1,2 8,4 +1,0 6,8 +0,8 5,6 +0,7 4,5 +0,6 4,3 +0,6 3,6 +0,5 2,9 +0,4
90 +0,6 15 +1,7 12,3 +1,4 10,1 +1,2 8,2 +1,0 6,7 +0,8 5,4 +0,7 5,1 +0,7 4,3 +0,6 3,5 +0,5
110 +0,7 18,3 +2,0 15,1 +1,7 12,3 +1,4 10,0 +1,1 8,1 +1,0 6,6 +0,8 6,3 +0,8 5,3 +0,7 4,2 +0,6

Our plant also produces polyethylene pipes for industrial water supply. Pipes are designed for pressure – a maximum working pressure of 0.25 MPa; 0.4 MPa; 0.6 MPa – and the free-flow pipelines, transporting water and other substances, to which polyethylene is chemically resistant. Do not use pipes for utility and drinking water supply for the transportation of flammable gasesPipes are manufactured in straight lengths and with couplings.

Mean outer diameter, mm Wall thickness of pipe type
SDR41 SDR26 SDR17,6 SDR17,6
PN2,5 PN4,0 PN6,0
Pressure
Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm
20 +0,3
25 +0,3 2,0 +0,4 2,0 +0,4
32 +0,3 2,0 +0,4 2,0 +0,4
40 +0,4 2,0 +0,4 2,3 +0,5 2,3 +0,5
50 +0,5 2,0 +0,4 2,9 +0,5 2,9 +0,5
63 +0,6 2,0 +0,4 2,5 +0,5 3,6 +0,6 3,6 +0,6
75 +0,7 2,0 +0,4 2,9 +0,5 4,3 +0,7 4,3 +0,7
90 +0,9 2,2 +0,5 3,5 +0,6 5,1 +0,8 5,1 +0,8
110 +1,0 2,7 +0,5 4,3 +0,7 6,3 +0,9 6,2 +0,9

The pipes produced in straight lengths from 5 to 12 m with multiplicity of 0.5 m. The pipes manufactured have diameter up to 63 mm. The pipes packed into bags or sealed with additional device according GOST 21650. The warranty period of storage includes two years from the date of manufacture.

Callback

We will call you back

This field is required

Incorrect data entry

This field is required

Incorrect data entry

The data are not transferred to third parties

Enter your contact information

We will call you back

This field is required

Incorrect data entry

This field is required

Incorrect data entry

The data are not transferred to third parties