Pressure pipes of non-metric sizes

Pressure pipes of non-metric sizes are manufactured for the nominal pressure (PN-nominal pressure – with constant internal water pressure in the pipeline at 20 ° C, which pipes can withstand predicted for 50 years): 9.0; 12.0; 15.0. Bar incl.
PVC-U pressure pipes with working pressure from 9 to 15 Atm used in the construction of swimming pools, water parks, fountains, applied for the water conditioning and water treatment systems. High strength and reliability of adhesive joints allow using these pipes in the complex design construction. Our plant has the technical ability to produce the pipes for adhesive joint with diameters from ½ inch to 4 inches and the working pressure of PN 9 (9 kgf / cm or 0.9 MPa), PN 12 (12 kgf / cm or 1.2 MPa), PN 15 (15 kgf / cm or 1.5 MPa). The pipe color is gray, shades not regulated. PVC-U pressure pipes of non-metric sizes have all the necessary certificates: pipes and fittings (CONFORMITY CERTIFICATE № UA1.100.0050305-15 of July 22, 2015) and approved for drinking water supply by the Ministry of Health Care of Ukraine № 505.07/156/5830 dated 18.05.2001. Each batch of pipes and fittings is accompanied by a quality certificate. The color of PVC-U pressure pipes and their fittings for drinking water supply is dark gray, shades not regulated.Sizes of PVC-U pipes for non-metric systems

Pipe outer diameter Mean outer diameter, mm Wall thickness, mm
PN 9 PN 12 PN 15
Nominal value, ins. Permissible roundness, mm D min D max Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm Nominal value, mm Limit deviation, mm
1/2 +0,3 21,2 21,5 1,7 0,4
3/4 +0,3 26,6 26,9 1,9 0,6
1 +0,5 33,4 33,7 2,2 0,6
1 1/4 +0,5 42,1 42,4 2,2 0,5 2,7 0,6
1 1/2 +0,5 48,1 48,4 2,5 0,5 3,1 0,6
2 +0,7 60,2 60,5 2,5 0,5 3,1 0,6 3,9 0,6
3 +1,0 88,7 89,1 3,5 0,6 4,6 0,7 5,7 0,9
4 +1,2 114,1 114,1 4,5 0,7 6,0 0,9 7,3 1,1

PVC-U pipes for non-metric systems produced in straight lengths. catalogphoto3The basic principle of connection for such type of pipes is adhesive joint. To connect such pipes in straight lengths, there used the couplings. The pipes with a special socket connected by adhesive joint and by growing technique. While installing the pipeline there applied the fittings (couplings, drainage, etc. of PVC-U material) designed for the corresponding nominal pressure.

PJSC “BROVARY PLASTIC PLANT”

For many years, PJSC “Brovary plastic plant” holds the leading position among the largest Ukrainian enterprises in the field of plastic processing.
Since its incorporation on March 22, 1966, the plant has been constantly increasing its production capacity, rapidly developing, mastering new advanced technologies in the processing of the polymeric material products by using equipment of leading Austrian and German companies, and also of national enterprises.

Callback

We will call you back

This field is required

Incorrect data entry

This field is required

Incorrect data entry

The data are not transferred to third parties

Enter your contact information

We will call you back

This field is required

Incorrect data entry

This field is required

Incorrect data entry

The data are not transferred to third parties